Emerson Site Supervisor User Manual

4-10 • Site Supervisor Controller User Guide 2.0 026-1800 Rev 3 02-AUG-2016
Touch an application to select.
“Other” Application Example
Alarm Examples
Touch the alarm icon for alarm system information:
Alarm severity is displayed by the following color indi-
cators: gray (lowest severity level), yellow (medium sever-
ity level), or red (highest severity level).
In this example, Emrs T-Stat_004 has been selected.
Alarm information for that application displays:
System Settings/Configuration
To change your PIN/Password, touch System Settings
(orange gear icon) and touch RESET USER PIN and fol-
low the prompts to change the PIN/password. When com-
plete, press SUBMIT.
To access IP Address information, select IP
ADDRESS in System Settings:
Figure 4-24
- Available “Other” Category Applications
Figure 4-25 - Alarm Display
Figure 4-26 - Alarm Display Information (T-Stat)
Figure 4-27 - System Settings/Configuration Screen
Figure 4-28 - PIN/Password Change

Emerson Site Supervisor Specifications

General

Brand	Emerson
Model	Site Supervisor
Category	Controller
Language	English