Liquiline System CA80SI Incoming acceptance and product identification
Endress+Hauser 15
Interpreting the order code
The order code and serial number of your product can be found in the following locations:
• On the nameplate
• In the delivery papers
Obtaining information on the product
1. Open the product website.
2. At the top of the page, select the link Product tools.
An additional sidebar opens up.
3. Select Online Tools followed by Access device specific information.
An additional window opens.
4. Enter the order code from the nameplate into the search field. Then select Show
details.
Details of each feature (selected option) of the order code are displayed.
4.2.3 Manufacturer address
Endress+Hauser Conducta GmbH+Co. KG
Dieselstraße 24
D-70839 Gerlingen
4.3 Scope of delivery
Scope of delivery
• 1 analyzer in the version ordered with optional hardware
• 1 print version of Brief Operating Instructions in the language ordered
• Accessories (irrespective of number of channels):
– Wall holder unit
– Magnetic stir bar (for installation in cuvette)
– 10 ml dispenser with hose (for draining cuvette and sample channel)
– SD card (optional)
– Supply hose
– Sample outlet hose (for sample overflow)
– Outlet hose (for overflow at cuvette)
Accessories (dependent on number of channels):
1-channel 2-channel 4-channel 6-channel
Filters and
pressure relief
valves
1 filter, 1 pressure
relief valve with
angle bracket
2 filters, 2 pressure
relief valves with
angle brackets
Panel with 4 pre-
installed filters and 4
pre-installed pressure
relief valves
Panel with 6 pre-
installed filters and 6
pre-installed pressure
relief valves
Sample channel
switching
in analyzer in analyzer pre-installed on panel pre-installed on panel
‣
If you have any queries:
Please contact your supplier or local sales center.
To Next Page
Loading...
