Endress+Hauser Liquiline CA80SI - 12.14 Resetting; 12.15 Operating Time Information

Liquiline System CA80SI Diagnostics and troubleshooting
Endress+Hauser 129
DIAG/Systemtest
Function Options Info
Dispenser selection
Selection
• None
• 1
• 2
• 3
Empty dispenser Dispenser is emptied
Draw up dispenser Dispenser draws in reagent from the reagent
bottles
Power Supply Read only
• Digital Supply 1: 1.2V
• Digital Supply 2: 3.3V
• Analog Supply: 12.5V
• Sensor Supply: 24V
• Temperature
Detailed list of power supply to instrument.

The actual values can vary without a
malfunction being present.
12.14 Resetting
DIAG/Reset
Function Options Info
Device restart Selection
• OK
• ESC
Restart and keep all the settings
Factory default Selection
• OK
• ESC
Restart with factory settings
Settings that have not been saved are lost.
12.15 Operating time information
DIAG/Operating time information
Function Options Info
Operating time filter mats
Filter mats Read only Displays the period of usage in days
Operating time photometer
Photometer Read only
Remaining operating time
Dispensers Displays the remaining period of usage in days;
i.e. the individual dispensers can still be used for
this many days.
Remaining operating
time
Read only
Dispenser 1,
Dispenser 2,
Dispenser 3
Read only
Set the relevant counter reading to zero with "Reset".