Endress+Hauser Liquiline CA80SI - Installing Version with Analyzer Stand

Liquiline System CA80SI Installation
Endress+Hauser 21
 18 Securing the holder unit on the housing
1.
2.
A0036781
 19 Hooking into the wall holder unit
1. Hook the analyzer into the wall holder unit.
2. Secure the two top parts of the wall holder unit with the screw supplied.
6.3 Installing version with analyzer stand
L
CAUTION
Incorrect installation can cause injury and damage the device
‣
If using the version with analyzer stand, make sure that the analyzer stand is secured
to the floor.