Repair Liquiline System CA80SI
138 Endress+Hauser
14 Repair
14.1 Spare parts
Contact your Endress+Hauser Service Department if you have any questions about the
spare parts.
14.2 Return
The product must be returned if repairs or a factory calibration are required, or if the
wrong product was ordered or delivered. As an ISO-certified company and also due to legal
regulations, Endress+Hauser is obliged to follow certain procedures when handling any
returned products that have been in contact with medium.
To ensure the swift, safe and professional return of the device:
‣
Refer to the website www.endress.com/support/return-material for information on the
procedure and conditions for returning devices.
14.3 Disposal
The device contains electronic components. and must therefore be disposed of in
accordance with regulations on the disposal of electronic waste.
‣
Observe the local regulations.
Always dispose of batteries in accordance with local regulations on battery disposal.
L
CAUTION
Danger of injury if used reagents and reagent waste are disposed of incorrectly
‣
When disposing, follow the instructions of the safety data sheets for the chemicals
used.
‣
Observe the local regulations regarding waste disposal.
To Next Page
Loading...
