Liquiline System CA80SI Operation
Endress+Hauser 65
Functions that are enabled by an activation code:
Function Activation code beginning with
Two current outputs (BASE-E module only) 081...
HART 0B1...
PROFIBUS PA 0B2...
PROFIBUS DP 0B3...
Modbus TCP 0B4...
Modbus RS485 0B5...
EtherNet/IP 0B6...
Cooling
2)
0F1...
Measuring range switching, set 1 211...
Measuring range switching, set 2
1)
212...
Feedforward control 220...
Chemoclean Plus 25...
Collecting vessel
2)
20...
Measuring channels
2)
28...
Configure the mathematical function Cation exchanger capacity 301...
1) When you order the "Measuring range switching" option, you receive two activation codes. Enter both in
order to have two sets for measuring range switching.
2) Availability depends on measuring parameter
Changing the password
You can lock the operating keys with a password (access the context menu by pressing the
navigator for longer). The keys can then only be enabled by entering the right password.
You can set the password to lock the keys here: Menu/Setup/General settings/Extended
setup/Data management/Change lock password.
1. Enter the current password (factory setting 0000).
Enter new lock password
2. Enter a new password.
Confirm new lock password
3. Enter the new password again.
The lock password has been changed successfully.
Press the navigator for longer to return to the measuring mode.
11.2 Analyzer
Menu/Setup/Analyzer
Function Options Info
Mode Read only Manual, automatic or fieldbus
Device tag Customized text,
32 characters
Factory setting
Analyzer_serial number
‣
Select any name for your analyzer. Use the
TAG name for example.
Meas. param Read only
Measuring range Read only
To Next Page
Loading...
