Endress+Hauser Liquiline CA80SI - 6-Channel Version: Installing Panel with Pressure Relief Valves and Filters

Installation Liquiline System CA80SI
24 Endress+Hauser
4. Mount the pressure relief valve on a level surface, e. g. on a panel. Note the direction
of flow.
5. Mount the filter with the angle bracket on a level surface, e. g. on a panel. Note the
direction of flow. Connect the hose piece from the pressure relief valve to the push-in
connector of the filter.
6.5 4-/6-channel version: Installing panel with pressure
relief valves and filters
Mounting materials are not supplied.
‣
The mounting materials must be provided by the customer onsite.
Panel dimensions
A0036340
 24 Panel with pressure relief valves and filters