Endress+Hauser Micropilot FMR56 - Page 30

Installation Micropilot FMR56, FMR57 FOUNDATION Fieldbus
30 Endress+Hauser
H
H
max
øD
1
2
A0016827
 9 Nozzle mounting of Micropilot FMR57 with parabolic antenna
1 Antenna protrudes from the nozzle
2 Antenna completely within the nozzle
Antenn
1)
Antenna diameter D Nozzle height H for case 1 Maximum nozzle height H
max
for case 2
FA: Parabol 200mm/8" 173 mm (6.81 in) < 50 mm (1.97 in) 500 mm (19.7 in)
FB: Parabol 250mm/10" 236 mm (9.29 in) < 50 mm (1.97 in) 500 mm (19.7 in)
1) Feature 070 of the product structure
Examples for installation with small flange
If the flange is smaller than the parabolic reflector, the device can be mounted in one of
the following ways:
• Standard installation →  30
This requires dismantling of the parabolic reflector.
• Installation with hinged flange →  31
Standard installation
H
øD
1
A0018874
1 Nozzle