Endress+Hauser Micropilot FMR60B - Page 80

Technical data Micropilot FMR60B PROFINET with Ethernet-APL
80 Endress+Hauser
Plastic housing; process temperature –40 to +80 °C (–40 to +176 °F)
T
a
T
p
P2
P1
P3
P4
P5
A0032024
 36 Plastic housing; process temperature –40 to +80 °C (–40 to +176 °F)
P1 = T
p
: –40 °C (–40 °F) | T
a
: +76 °C (+169 °F)
P2 = T
p
: +76 °C (+169 °F) | T
a
: +76 °C (+169 °F)
P3 = T
p
: +80 °C (+176 °F) | T
a
: +75 °C (+167 °F)
P4 = T
p
: +80 °C (+176 °F) | T
a
: –40 °C (–40 °F)
P5 = T
p
: –40 °C (–40 °F) | T
a
: –40 °C (–40 °F)
In the case of devices with a plastic housing and CSA C/US approval, the selected
process temperature of
–40 to +80 °C (–40 to +176 °F) is limited to 0 to +80 °C (+32 to +176 °F).
Restriction to a process temperature of 0 to +80 °C (+32 to +176 °F) with CSA C/US
approval and plastic housing
T
a
T
p
P2
P1
P3
P4
P5
A0048826
 37 Plastic housing; process temperature 0 to +80 °C (+32 to +176 °F) with CSA C/US approval
P1 = T
p
: 0 °C (+32 °F) | T
a
: +76 °C (+169 °F)
P2 = T
p
: +76 °C (+169 °F) | T
a
: +76 °C (+169 °F)
P3 = T
p
: +80 °C (+176 °F) | T
a
: +75 °C (+167 °F)
P4 = T
p
: +80 °C (+176 °F) | T
a
: 0 °C (+32 °F)
P5 = T
p
: 0 °C (+32 °F) | T
a
: 0 °C (+32 °F)