Endress+Hauser Proline Promass E 300 - Page 124

Commissioning Proline Promass E 300 PROFINET
124 Endress+Hauser
Parameter overview with brief description
Parameter Description Selection Factory setting
Assign process variable Select process variable for totalizer. • Volume flow
• Mass flow
• Corrected volume flow
• Total mass flow
• Condensate mass flow
• Energy flow
• Heat flow difference
–
Unit totalizer Select the unit for the process variable of the
totalizer.
Unit choose list Country-specific:
• kg
• lb
Totalizer operation mode Select totalizer calculation mode. • Net flow total
• Forward flow total
• Reverse flow total
• Last valid value
–
Failure mode Define the totalizer behavior in the event of
a device alarm.
• Stop
• Actual value
• Last valid value
–