Endress+Hauser Proline Promass E 300 - Displaying the Communication

Commissioning Proline Promass E 300 PROFINET
92 Endress+Hauser
Parameter Description Selection Factory setting
Temperature unit Select temperature unit.
Result
The selected unit applies for:
• Electronic temperature parameter
(6053)
• Maximum value parameter (6051)
• Minimum value parameter (6052)
• External temperature parameter (6080)
• Maximum value parameter (6108)
• Minimum value parameter (6109)
• Carrier pipe temperature parameter
(6027)
• Maximum value parameter (6029)
• Minimum value parameter (6030)
• Reference temperature parameter
(1816)
• Temperature parameter
Unit choose list Country-specific:
• °C
• °F
Pressure unit Select process pressure unit.
Result
The unit is taken from:
• Pressure value parameter (→  95)
• External pressure parameter (→  95)
• Pressure value
Unit choose list Country-specific:
• bar a
• psi a
10.5.3 Displaying the communication interface
The Communication submenu shows all the current parameter settings for selecting and
configuring the communication interface.
Navigation
"Setup" menu → Communication
‣
Communication
MAC address
→  92
IP address
→  92
Subnet mask
→  93
Default gateway
→  93
Parameter overview with brief description
Parameter Description User interface / User entry Factory setting
MAC address Displays the MAC address of the measuring
device.

MAC = Media Access Control
Unique 12-digit character
string comprising letters and
numbers, e.g.:
00:07:05:10:01:5F
Each measuring device is given
an individual address.
IP address IP address of the Web server integrated in
the measuring device.
If the DHCP client is switched off and write
access is enabled, the IP address can also be
entered.
4 octet: 0 to 255 (in the
particular octet)
–