Endress+Hauser Proline Promass E 300 - Measured Variables Submenu

Operation Proline Promass E 300 PROFINET
142 Endress+Hauser
11.4.1 "Measured variables" submenu
The Measured variables submenu contains all the parameters needed to display the
current measured values for each process variable.
Navigation
"Diagnostics" menu → Measured values → Measured variables
‣
Measured variables
Mass flow
→  142
Volume flow
→  142
Corrected volume flow
→  142
Density
→  142
Reference density
→  143
Temperature
→  143
Pressure value
→  143
Concentration
→  143
Target mass flow
→  143
Carrier mass flow
→  143
Parameter overview with brief description
Parameter Prerequisite Description User interface
Mass flow – Displays the mass flow that is currently
measured.
Dependency
The unit is taken from the Mass flow
unit parameter (→  91).
Signed floating-point
number
Volume flow – Displays the volume flow currently
calculated.
Dependency
The unit is taken from the Volume flow
unit parameter (→  91).
Signed floating-point
number
Corrected volume flow – Displays the corrected volume flow that
is currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→  91).
Signed floating-point
number
Density – Shows the density currently measured.
Dependency
The unit is taken from the Density unit
parameter (→  91).
Signed floating-point
number