Endress+Hauser Proline Promass E 300 - Device Information and Maintenance; Device Information

Proline Promass E 300 PROFINET Diagnostics and troubleshooting
Endress+Hauser 219
Options Description
Restart device The restart resets every parameter whose data are in the volatile memory (RAM)
to the factory setting (e.g. measured value data). The device configuration remains
unchanged.
Restore S-DAT backup Restore the data that are saved on the S-DAT. The data record is restored from the
electronics memory to the S-DAT.

This option is displayed only in an alarm condition.
12.12 Device information
The Device information submenu contains all parameters that display different
information for device identification.
Navigation
"Diagnostics" menu → Device information
‣
Device information
Device tag
→  219
Serial number
→  219
Firmware version
→  219
Device name
→  220
Manufacturer
Order code
→  220
Extended order code 1
→  220
Extended order code 2
→  220
Extended order code 3
→  220
ENP version
→  220
Parameter overview with brief description
Parameter Description User interface Factory setting
Device tag Shows name of measuring point. Max. 32 characters such as
lower-case letters or numbers.
–
Serial number Shows the serial number of the measuring
device.
Max. 11-digit character string
comprising letters and
numbers.
–
Firmware version Shows the device firmware version installed. Character string in the format
xx.yy.zz
–