Endress+Hauser Proline Promass E 300 - Page 220

Diagnostics and troubleshooting Proline Promass E 300 PROFINET
220 Endress+Hauser
Parameter Description User interface Factory setting
Device name Shows the name of the transmitter.

The name can be found on the
nameplate of the transmitter.
Promass 300/500 –
Order code Shows the device order code.

The order code can be found on the
nameplate of the sensor and
transmitter in the "Order code" field.
Character string composed of
letters, numbers and certain
punctuation marks (e.g. /).
–
Extended order code 1 Shows the 1st part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 2 Shows the 2nd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 3 Shows the 3rd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
ENP version Shows the version of the electronic
nameplate (ENP).
Character string –