Endress+Hauser Proline Prowirl 73 - Page 160

Description of device functions Proline Prowirl 73
160 Endress+Hauser
GAS TYPE 1 Description
Use this function to select gas type 1.
The NOT USED option is a placeholder and is not used for the calculation.
Options
AIR
AMMONIA
ARGON
BUTANE
CARBON DIOXIDE
CARBON MONOXIDE
CHLORINE
ETHANE
ETHYLENE
HELIUM 4
HYDROGEN NORMAL
HYDROGEN CHLORIDE
HYDROGEN SULFIDE
KRYPTON
METHANE
NEON
NITROGEN
OXYGEN
PROPANE
SULFUR DIOXIDE
VINYL CHLORIDE
XENON
OTHER
NOT USED
Factory setting
• As per the parameter printout supplied with the device if Prowirl 73 was ordered with
a preprogrammed mixture.
• Otherwise "AIR" is the factory setting
MOLE % GAS 1 Description
Use this function to display the mole-% for the gas selected in GAS TYPE 1.
Display
000.00 % to 100.00 %
Factory setting
• As per the parameter printout supplied with the device if Prowirl 73 was ordered with
a preprogrammed mixture.
• Otherwise "0 %" is the factory setting.
GAS TYPE n Prerequisite
This function is not available if the option selected in NUMBER OF GASES (ä 159) is
< n (max. 8).
Description
Use this function to select the gas type n (max. 8).
Options
Options as for GAS TYPE 1
Factory setting
• As per the parameter printout supplied with the device if Prowirl 73 was ordered with
a preprogrammed mixture.
• Otherwise "NOT USED" is the factory setting.
MOLE % GAS n Description
Use this function to display the mole-% for the gas selected in GAS TYPE n (max. 8).
Display
000.00 % to 100.00 %
Factory setting
• As per the parameter printout supplied with the device if Prowirl 73 was ordered with
a preprogrammed mixture.
• Otherwise "0 %" is the factory setting.
Function description, GAS MIXTURE group