Enotec COMTEC 6000 - System Configuration

Installation and Operation Manual - COMTEC
®
6000 Software Overview and Explanations
Doc.-ID: COM6000_11022020_EN 23
Calibration results (cont.)
~~ Test gas data ~~
Test air (20,95 % O
2
)
Test air (0 ppm CO)
Test gas (e.g. 2,1 % O
2
)
Test gas (e.g. 1000 ppm CO)
~~ Sensor raw data~~
O
2
voltage at test air (mV)
O
2
voltage at test gas (mV)
O
2
response to test gas (s)
O
2
sensor life
CO
e
voltage at test air (mV)
CO
e
voltage at test gas (mV)
Device operating data
Powers on counter
Hours in operation
Min. internal temperature
Max. internal temperature
Software version and options
Software COMTEC 6000
~~ Options ~~
♦ .....
SYS-MENU
System configuration
O
2
Measuring ranges
Meas.range 1 from (% O
2
)
Meas.range 1 to (% O
2
)
Meas.range 2 from (% O
2
)
Meas.range 2 to (% O
2
)
Meas.range select by (dig.input / keypad)
Meas.value averaging for (s)
Conversion wet → dry (% H
2
O)
mA output type (0-20 mA / 4-20 mA)
mA output on system error (mA)