Installation and Operation Manual - COMTEC
®
6000 Installation
Doc.-ID: COM6000_11022020_EN 11
2.3 Access to the Terminals
Warning
Before removing the terminal covers, switch off the mains voltage to the system. Switch the mains volt-
age on only after attaching the terminal cover. After the installation has been completed, live parts may
no longer be accessible.
Figure 6 - Access to the Terminals
2.4 Ferrite Sleeves (EMC)
Caution
In order to avoid cable related disturbances to the electronic unit, the supplied ferrite sleeves must be used.
CE-conformity is invalid if these ferrite sleeves are not fitted!
To Next Page
Loading...
