Enotec COMTEC 6000 - System Management and Remote Operations

Installation and Operation Manual - COMTEC
®
6000 Software Overview and Explanations
Doc.-ID: COM6000_11022020_EN 25
System clock/TAG number
System date (jjjj-mm-tt)
System time (hh:mm:ss)
TAG
ENOTEC REMOTE settings (optional)
} Visible when ENOTEC REMOTE interface is activated
ENOTEC REMOTE (ON/OFF)
Passkey (8 digit code)
} Visible when ENOTEC REMOTE is ON
Range (Short / Medium / Maximum)
Measuring units
Temperature (°C / °F)
Pressure (mbar / psi)
COe value (ppm / mg/m
3
)
Probe type and cable length
Probe type
cable length (m)
Language
Choose language (Deutsch / English / Spanish / Polish / French)
Change system code
Load factory settings
Set CO
e
measurement ON/OFF
Service