Section 2 — Algorithms
ENSONIQ DP/4+ Reference Manual 27
09 — Comp Noise Gate Off Below Range: -96 to +00 dB
Sets the lower threshold level at which the noise gate shuts off the audio.
10 — Comp Noise Gate On Above Range: -96 to +00 dB
Sets the upper threshold level at which the noise gate passes audio. This higher second threshold
prevents false “turn ons.”
11 — Gate Release Time Range: 1ms to 10.0s
Determines how long it takes for the gate to be fully released after the input signal drops below
the threshold level. Lower settings yield a quick gate.
12 — Bass Fc Range: 0 to 1000 Hz
Sets the cutoff frequency of the lower frequency band shelving filter.
13 — Bass EQ Gain Range: -48 to +24 dB
Sets the amount of boost or cut applied to the low shelving filter.
14 — Treble Fc Range: 01KHz to 16KHz
Sets the cutoff frequency of the upper frequency band high shelving filter.
15 — Treble EQ Gain Range: -48 to +24 dB
Sets the amount of boost or cut applied to the high shelving filter.
16 — EQ Input Level Trim Range: -24 to +00 dB
Adjusts the input volume of the EQs, to eliminate the possibility of clipping boosted signals.
17 — Mod1 Source 21 — Mod2 Source
18 — Mod1 Destination 22 — Mod2 Destination
19 — Mod1 Param Range Min 23 — Mod2 Param Range Min
20 — Mod1 Param Range Max24 — Mod2 Param Range Max
See the descriptions under the Algorithm Modulators earlier in this section.
To Next Page
Loading...
Need help?
General
