Enterasys SecureStack C3G124-24P - Connectivity; Description of Mini-Gbics

Connectivity
1-6 Introduction
Connectivity
TheswitchconnectstoEthernetnetworksorworkstationsthroughthefixedfrontpanel
RJ45connectorsandfouruplinkportsthatsupportoptionalMini‐GBICs.
Atthetimeofthisprinting,theMini‐GBICssupportedandavailablefromEnterasysare
describedinTable 1‐2below.TheseMini‐GBICsmeetorexceedthe
IEEE802.3z‐1998
standard.
Table 1-2 Description of Mini-GBICs
Mini-GBIC Specification
MGBIC-LC01 Provides one 1000BASE-SX compliant LC fiber-optic multimode port and a
standard LC connector. For optical and operating range specifications, refer to
“MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)” on page A-4.
MGBIC-LC03 Provides one 1000BASE-SX compliant LC fiber-optic multimode port with a
standard LC duplex connector. For optical and operating range specifications,
refer to “MGBIC-LC03 Specifications (1000BASE-SX)” on page A-5.
MGBIC-LC09 Provides one 1000BASE-LX compliant LC fiber-optic single-mode port with a
standard LC connector. For optical and operating range specifications, refer to
“MGBIC-LC09 Specifications (1000BASE-LX)” on page A-5.
MGBIC-MT01 Provides one 1000BASE-SX compliant LC fiber-optic multimode port with a
standard MT-RJ connector. For optical and operating range specifications,
refer to “MGBIC-LC01/MGBIC-MT01 Specifications (1000BASE-SX)” on
page A-4.
MGBIC-08 Provides one 1000BASE-ELX compliant LC fiber-optic single-mode port with a
standard LC connector. For optical and operating range specifications, refer to
“MGBIC-08 Specifications (1000BASE-ELX)” on page A-6.
MGBIC-02 Provides one RJ45 copper connection that is compliant with a 1000BASE-T
standard RJ45 connector. For optical and operating range specifications, refer
to “MGBIC-02 Specifications (1000BASE-T)” on page A-6.