Enterasys SecureStack C3G124-24P - Mini-GBIC Specifications

Mini-GBIC Input/Output Specifications
SecureStack C3 Installation Guide A-3
Mini-GBIC Input/Output Specifications
TheMini‐GigabitInterfaceCard(Mini‐GBIC)portinterfaceslotscansupport1‐Gbps
fiber‐opticandcopperconnectionsasdescribedinTable A‐2.TheoptionalMini‐GBICs
arehotswappable.
AC Input Specifications
Input Voltage 100–125 Vac or 200–240 Vac with automatic power sensing
AC Volt Amps
C3G124-24P
C3G124-48P
539 VA
583 VA
Input Current
C3G124-24P
C3G124-48P
4.9A at 110V, 2.5A at 220V
5.3A at 110V, 2.9A at 220V
Phasing Single-phase
Frequency 50 to 60 Hz
Environmental
Operating Temperature 0°C to 45°C (32°F to 113°F)
Storage Temperature -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity 5% to 95% (non-condensing)
Table A-1 C3G124-24P and C3G124-48P Specifications (continued)
Item Specification
Table A-2 Mini-GBIC Input/Output Port Specifications
Item Specification
MGBIC-LC01 Provides one LC fiber-optic multimode port that is compliant with the
1000BASE-SX standard LC connector.
MGBIC-LC03 Provides one LC fiber-optic multimode port that is compliant with the
1000BASE-SX standard LC connector.
MGBIC-LC09 Provides one LC fiber-optic single-mode port that is compliant with the
1000BASE-LX standard LC connector.
MGBIC-MT01 Provides one MT-RJ fiber-optic multi-mode port that is compliant with
the 1000BASE-SX standard MT-RJ connector.
MGBIC-08 Provides one LC fiber-optic single-mode port that is compliant with the
1000BASE-ELX standard LC connector.