SecureStack C3 Installation Guide 2-1
2
Network Requirements
Beforeinstallingtheswitch,reviewtherequirementsandspecificationsinthischapter
concerningthefollowing:
Note: All RJ45 connectors support PoE connections from network PDs (Powered
Devices).
For information about... Refer to page...
10BASE-TX Network 2-2
100BASE-TX Network 2-2
1000BASE-FX Network 2-2
1000BASE-T Network 2-2
Note: The network installation must meet the requirements described in this chapter to
ensure satisfactory performance of this equipment. Failure to do so will produce poor
network performance.
Note: The SecureStack C3 Configuration Guide and the Cabling Guide referred to in the
following sections can be found on the Enterasys Networks World Wide Web site:
http://www.enterasys.com/support/manuals/
For details about obtaining the manuals, refer to “Related Documents” on page xiv.
To Next Page
Loading...
