Enterasys SecureStack C3G124-24P

SecureStack C3 Installation Guide 4-1
4
Troubleshooting
Thischapterprovidesinformation concerningthefollowing:
Thisdevicecontainsabattery tha tisnotconsideredauserreplaceablepart.Ifthebattery
needstobereplaced,contactcustomerserviceforrepair.
Using LANVIEW
TheswitchusestheEnterasys Networksbuilt ‐invisualdiagnosticandstatusmonitoring
systemcalledLANVIEW. ForthelocationofLANVIEWLEDsontheC3G124‐24Pand
C3G124‐48P,refertoFigure 4‐1andFigure 4‐2,respectively.TheseLEDsallowyouto
quicklyobservenetworkstatusfordiagnosingswitchandnetwork
problems.
For information about... Refer to page...
Using LANVIEW 4-1
Troubleshooting Checklist 4-7
Using the Reset Switch 4-8
Caution: There is a risk of explosion if the battery is replaced with an incorrect type. A
used battery may be safely disposed in a municipal waste stream.
Precaucion: Hay riesgo de explosion si la bateria se reemplaza con el typo incorrecto.
Puede tirar la bateria usada en la basura