Epson Aculaser C9200N - Page 295

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 295
Confidential
3. Remove four Screws [4] and remove the pickup roller assy [5].
4. Remove two Screws [6] and the installation flame [7] of the separation roller installation
plate assy.
4067F2C502DA
4067F2C503DA
[4]
[5]
[4]
[6]
[7]
[6]
5. Remove two Screws [8] and pickup roller cover 9].
6. Remove two C-rings [10] and two bushings [11], and remove the pickup roller assy [12].
7. Snap off the C-ring [13], and remove the Pickup Roller [14].
4067F2C504DA
[9]
4067F2C510DA
406
7F2C511DA
[8]
[12]
[10]
[11]
[13]
[14]
[11]