Transporting the Printer
For short distances
Before you move the printer, prepare the location where
you are going to place it.
See the following sections.
❏ “Setting up the printer” on page 7
❏ “Finding the place for the printer” on page 8
A
Make sure the printer is turned off and the
operation panel is unlit, and then unplug the
power plug from the outlet.
B
Remove the following items from the printer.
❏ Power cord
❏ Interface cables
❏ Loaded paper
❏ Installed options (For AL-M320DN/
AL-M310DN)
C
Be sure to lift the printer by the correct positions
as shown below.
Do not touch the projections on the bottom of
the printer that are for connecting an optional
paper cassette.
c
Important:
When moving the printer, always keep it
horizontal.
For long distances
Before you move the printer, prepare the location where
you are going to place it.
See the following sections.
❏ “Setting up the printer” on page 7
❏ “Finding the place for the printer” on page 8
Repacking the printer
If you need to transport your printer for long distances,
carefully repack it using the original box and packing
materials.
A
Make sure the printer is turned off and the
operation panel is unlit, and then unplug the
power plug from the outlet.
B
Remove the following items from the printer.
❏ Power cord
❏ Interface cables
❏ Loaded paper
❏ Installed options (For AL-M320DN/
AL-M310DN)
C
Press the button on the top to open covers F1 and
F2.
c
Important:
Do not touch the inner rollers and gears.
Doing so may cause malfunctions or
deterioration in print quality.
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Troubleshooting
100
To Next Page
Loading...
Need help?
General