Item Explanation
207 Toner Install Mixes toner in the developer to spread it evenly, this prevents the printouts from being
too light. Do not turn off the printer until the LCD panel displays Ready.
209 Fuser Control Select 1 if the fluorescent light flickers when printing.
Settings (default in bold):
0: Normal mode
1: Reducing flicker mode
301 Noise Level Adjusts the image gradation. As the value increases, the image gradation gets better, but
the image granularity gets worse.
Settings (default in bold):
0 ... 3 ... 7 (step 1)
303 Screen 25
304 Screen 50
305 Screen 100
Prints halftone or full pattern which allows you to check the unevenness of the density or
pitch of the printout.
303 Screen 25 prints the pattern in a 25% density halftone.
304 Screen 50 prints the pattern in a 50 % density halftone.
305 Screen 100 prints the pattern at 100% density.
Consumable Products and Options
Consumable products
Product name Part number Remark
Standard Capacity Toner Cartridge 10080 ❏ Storage temperature:
10 to 32.5˚C (50 to 90.5˚F)
❏ Storage humidity:
15 to 80% RH
❏ These products comply with CE marking requirements
in accordance with EMC Directive 2004/108/EC.
High Capacity Toner Cartridge 10079
Extra Capacity Toner Cartridge (for
AL-M320DN)
10078
Maintenance Unit A (for AL-M320DN/
AL-M310DN)
10081
Maintenance Unit B (for AL-M320DN/
AL-M310DN)
10082
Options
Product name Part number Remark
250-Sheet Paper Cassette Unit (for
AL-M320DN/AL-M310DN)
C12C932811 This product complies with CE marking requirements in
accordance with EMC Directive 2004/108/EC.
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Appendix
109
To Next Page
Loading...
Need help?
General
