Printer Settings
Note:
❏ The settings in the Printing Menu are overridden by the settings done in the printer driver from the Printing
Preferences.
❏ You can also set items in Printing Menu from Printer Properties > Optional Settings > Printer Settings.
Tray Menu
Item Explanation
Paper Size Warning
(AL-M320DN/AL-M310DN)
Specifies the trays that need a message to confirm that the paper size in the tray matches
the settings on the control panel. This warning message is displayed on the control panel
when you load paper in the MP tray and when you close a paper cassette.
Settings (default in bold):
Off, Cassette, Cassette & MP, MP Tray
Size Warning Timeout
(AL-M320DN/AL-M310DN)
Specify the length of the time until the Paper Size Warning message is turned off.
Settings (default in bold):
5 sec, 10 sec
MP Tray Size Specifies the paper size loaded in MP Tray.
For the sizes of paper that are available, refer to “Available Paper and Capacities” on
page 40.
MP Tray Type Specifies the paper type loaded in the MP tray.
For the types of paper that are available, refer to “Available Paper and Capacities” on
page 40.
Cassette1 Size Specifies the paper size loaded in the standard paper cassette.
For the sizes of paper that are available, refer to “Available Paper and Capacities” on
page 40.
Cassette1 Type Specifies the paper type loaded in the standard paper cassette.
For the types of paper that are available, refer to “Available Paper and Capacities” on
page 40.
Cassette2 Size/Cassette3 Size
(AL-M320DN/AL-M310DN
only)
Specifies the paper size loaded in the optional paper cassette.
For the sizes of paper that are available, refer to “Available Paper and Capacities” on
page 40.
Cassette2 Type/Cassette3
Type
(AL-M320DN/AL-M310DN
only)
Specifies the paper type loaded in the optional paper cassette.
For the types of paper that are available, refer to “Available Paper and Capacities” on
page 40.
MP Tray AutoSel/Cassette1
AutoSel/Cassette2 AutoSel
*
/
Cassette3 AutoSel
*
* AL-M320DN/AL-M310DN
only
Specifies whether the tray can be selected for printing when Paper Source is selected for
Auto Selection in the printer driver.
Settings (default in bold):
On, Off
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Getting to Know Your Printer
28