Maintaining the Printer
Replacing Consumable Products/Maintenance Parts
Precautions during replacement
Always observe the following handling precautions when replacing consumable products/maintenance parts.
For details about the replacements, see the instructions that come with the consumable products.
!
Caution:
❏ Be careful not to touch the fuser, which is marked with a caution label, or the surrounding areas. If the printer has
been in use, the fuser and surrounding areas may be very hot.
❏ Do not dispose of used consumable products/maintenance parts in fire, as they may explode and cause injury.
Dispose of them according to local regulations.
❏ Provide enough space for the replacement procedure. You will have to open some parts (such as the printer cover)
of the printer when you are replacing consumable products/maintenance parts.
❏ Do not install used consumable products that reach end of service life into the printer.
For details about the handling precautions, see “Handling the consumable products and maintenance parts” on
page 9.
If a consumable product reaches the end of its service life, the printer displays the following message on the LCD panel
or the window of EPSON Status Monitor.
Replacement Messages/Lights
For AL-M320DN/AL-M310DN
LCD Panel Message
Replace Toner Cartridge
Replace Maintenance Unit A
Replace Maintenance Unit B
For AL-M220DN
light on
Light off
Status-specific (either lit, blinking, or unlit)
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Maintaining the Printer
68
To Next Page
Loading...
Need help?
General