Item Explanation
Job Information (M320DN/
M310DN)
Selects the pattern in which the job information is displayed on the control panel.
If Off is selected, no job information is displayed on the control panel, even if the Pause/
Release button is pressed to cancel or skip a job.
If Norsk, CATALÀ,
, Türkçe, , , or is selected as Language
when the printer is turned on for the first time after you purchase it, the default value is
Off. If other language is selected, the default value is Display Pattern 1.
Do not select Display Pattern 1 when the following languages are selected as
Language: Norsk, CATALÀ,
, Türkçe, , ,
Settings:
Display Pattern 1, Display Pattern 2, Off
Local Time Diff. Specifies the current date and time by entering the time difference from Greenwich Mean
time.
Settings (default in bold):
-14:00 … 0:00 … +14:00
Time Setting Specifies the current date and time by entering them directly.
Settings:
2010/ 01/01 00:00 to 2098/12/31 23:59
Date Format Specifies the format to display the date.
Settings (default in bold):
DD/MM/YY, MM/DD/YY, YY/MM/DD
USB Menu
Note:
❏ After any item in the menu is changed, the setting takes effect after a warm boot or after the power is turned on
again. While it is reflected in the Status Sheet, the actual change takes effect after a warm boot or after the power is
turned on again.
❏ To use EpsonNet Config with a web browser to do settings, access Configuration > Common Settings > USB
Menu.
Item Explanation
USB I/F Allows you to activate or deactivate the USB interface.
Settings (default in bold):
On, Off
USB Speed Allows you to select the operation mode of USB interface. Selecting HS is recommended.
Select FS if HS does not work on your computer system.
Settings (default in bold):
HS, FS
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Getting to Know Your Printer
24
To Next Page
Loading...
Need help?
General