Item Explanation
Text Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you
change the Orientation, Page Size, or T.Margin settings, the page length setting
automatically returns to the default for each paper size.
Settings (default in bold):
1 ... 67 Lines
Auto CR Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation
whenever the printing position goes beyond the right margin. If you select Off, the
printer does not print any characters beyond the right margin and does not perform any
line wrapping until it receives a carriage-return character. This function is handled
automatically by most applications.
Settings (default in bold):
Off, On
Auto LF If you select Off, the printer does not send an automatic line-feed (LF) command with
each carriage-return (CR). If On is selected, a line-feed command is sent with each
carriage-return. Select On if your text lines overlap.
Settings (default in bold):
Off, On
Alt. Graphics Turns the Alternate Graphics option on or off.
Settings (default in bold):
Off, On
Bit Image The printer is able to emulate the graphics densities set with the printer commands. If you
select Dark, the bit image density is high, and if you select Light, the bit image density is
low.
Settings (default in bold):
Dark, Light
ZeroChar Specifies whether the printer prints a slashed or unslashed zero.
Settings (default in bold):
0, (or the zero character with a slash)
CharacterSet Selects character table 1 or 2.
Settings (default in bold):
1, 2
AL-M320DN/AL-M310DN/AL-M220DN User's Guide
Getting to Know Your Printer
37
To Next Page
Loading...
Need help?
General