Policy menu
Sub-menu Function
Policy Setting
Enables or disables functions such as Capture, Print, and Scan.
Internal Storage
Use the Internal Storage: Set to On to save data to the internal
storage when using Whiteboard Mode. When set to Off, you can
only edit one page at a time, and the internal storage function is
limited. Normally, we recommend setting this to On.
Auto Delete Saved Data: When set to Clear, all drawing data is
deleted from the internal storage when the projector is turned off.
Normally, we recommend setting this to Retain.
Backup Time for Saved Data: Sets the time to store a backup of
drawing data if the power is accidentally turned off. A backup is
performed even when Auto Delete Saved Data is set to Clear.
Print menu
Sub-menu Function
Default Printer
Set the default printer used when printing.
The selected printer is displayed as the default in Whiteboard
Mode.
In PC Free Annotation, this printer is used automatically.
Paper Size
Sets the paper size.
IP Address
Enter the IP address for the network printer.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 192.0.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Get Printer Infor‐
mation
Communicates with the printer associated with the IP address,
and automatically recognizes the printer type.
Printer Type
Sets the type of connected printer. Normally use the values set
automatically when printer information is acquired.
List of Functions
148
To Next Page
Loading...
