Sub-menu Function
Test Print
Prints a test page.
Save menu
Sub-menu Function
Default Save Lo‐
cation
Sets the default save location for drawing data.
This is displayed as the default save location when saving data in
Whiteboard Mode.
In PC Free Annotation, data is automatically saved to this
location when performing a save.
Sub-menu Function
UNC Address
Sets the network folder name in UNC "\\host name\share name
\relative path". You cannot use an IP address as the host name.
You can enter up to 116 single-byte alphanumeric characters
(you cannot use spaces).
a
This function uses Windows file sharing.
The projector communicates with the file shar‐
ing server using the following ports.
• NetBIOS name service 137/UDP 137/TCP
• NetBIOS datagram service 138/UDP
• NetBIOS session service 139/TCP
User name
Set the user name that has read/write access authority for the
network folder. You can enter up to 64 single-byte alphanumeric
characters (you cannot use spaces). If you also need to enter a
domain name, add the domain name before the user name
separated by a backslash.
Password
Enter a password for the user name. You can enter up to 64
single-byte alphanumeric characters. When the password is
entered and Setup complete is selected, the value is set and
displayed as an asterisk (*).
Check Connec‐
tion
Performs a connection check.
List of Functions
149
To Next Page
Loading...
