Epson EB-PU2220B User Manual

Network Menu
114
Community Name
s Network > Network Configuration > Notifications > Community Name
Enter the SNMP community name up to 32 alphanumeric characters long.
(Do not use spaces and any symbols other than @.)
PJLink Notification
s Network > Network Configuration > Notifications > PJLink
Notification
Set to On to enable the PJLink notification function when the PJLink setting
is enabled.
Notified IP Address
s Network > Network Configuration > Notifications > Notified IP
Address
Enter the IP address to receive the projector's operating status when the
PJLink notification function is enabled. Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Command Communication
s Network > Network Configuration > Others > Command
Communication
You can select the authentication method for command communication.
Protected
Select when performing a digest authentication using Web Control
Password. You need to install the latest version of the Epson Projector
Management software.
Compatible
Select when performing plain text authentication using the Monitor
Password (up to 16 alphanumeric characters long).
a
Select Compatible when monitoring projectors with a switcher and a
system controller or using Epson Projector Management ver.5.30 or
earlier.
Secure HTTP
s Network > Network Configuration > Others > Secure HTTP
To strengthen security, communication between the projector and computer
in Web control is encrypted. When setting security with Web control, it is
recommended to set this to On.
Web Server Certificate
s Network > Network Configuration > Others > Web Server Certificate
Imports the Web server certificate for secure HTTP.
Web API Settings
s Network > Network Configuration > Others > Web API Settings
You can select the Web API settings when using Web API communications.
Web API
Set to On to enable the Web API function.

Epson EB-PU2220B Specifications

General

Matrix type	3-panel (p-Si TFT active)
Number of colors	1.07 billion colors
Native aspect ratio	-
Projection technology	3LCD
Supported aspect ratios	4:3, 16:10, 16:9
Contrast ratio (typical)	2500000:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Keystone correction, vertical	±45 °
Keystone correction, horizontal	±30 °
Light source type	Laser
Service life of light source	20000 h
Focus	Auto
Throw ratio	1.57 – 2.56
Optical zoom	1.6 x
Focal length range	14.8 – 17.7 mm
Aperture range (F-F)	2 - 2.1
Interchangeable lens	Yes
Vertical lens shift range	-60 - 60 %
Horizontal lens shift range	-18 - 18 %
Number of optional lenses supported	9
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160i, 2160p
Supported graphics resolutions	640 x 480 (VGA), 720 x 576, 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 3840 x 2160, 4096 x 2160
HDMI connector type	Full-size
Serial interface type	RS-232C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 2.0 Type-A ports quantity	2
Noise level	45 dB
HDCP version	2.3
Projection modes	Ceiling, Front, Rear
Noise level (economic mode)	37 dB
Product type	Large venue projector
Product color	Black
Market positioning	Presentation
Cable lock slot type	Kensington
Power source	AC
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	2 W
Power consumption (typical)	1301 W
Power consumption (economy mode)	899 W
Operating temperature (T-T)	0 - 50 °C
Sustainability certificates	RoHS

Weight and Dimensions

Depth	493 mm
Width	587 mm
Height	218 mm
Weight	24400 g