Settings Menu
89
Load Memory
You can load the saved memory. The settings applied to the current image
are replaced with the settings in the memory.
Save Memory
You can save your current settings to memory.
Erase Memory
You can erase the selected memory settings.
Rename Memory
You can rename a saved memory.
Reset Memory Settings
You can delete all saved memories.
a
• A memory name that has already been used is indicated by a blue
mark. Saving over a previously saved memory overwrites the settings
with your current settings.
• The lens position when a memory is loaded may not completely
match the lens position when the memory was saved. If there is a
large discrepancy between the lens position, calibrate the lens.
• You can also open the Memory screen using the [Memory] button
on the remote control.
Content Playback
s Settings > Content Playback
You can easily project your digital signage content: playlists that contain
images and movies saved on an external storage device.
Content Playback
Set to On to play back a playlist.
Overlay Effect
You can add color and shape effects to the projected image.
USB Viewer
You can select and play back a playlist saved on the USB flash drive.
a
• You cannot select the Overlay Effect setting in the following cases.
• When Edge Blending is set to Blending/Black Level or Black
Level in the projector's Extended menu.
• When the current source is USB and there is no playlist being
played.
• When the current source is USB and a writing error has occurred.
• You can use the following methods to create playlists.
• Using Epson Projector Content Manager on your computer.
You can download and install Epson Projector Content Manager
from the following Web site.
epson.sn
• Using Epson Web Control with a Web browser.
• Using Epson Creative Projection on iOS devices.
You can download Epson Creative Projection from the App Store.
Any fees incurred when communicating with the App Store are the
responsibility of the customer.
• When you assign the USB function to the [User] button on the
remote control using the User Button setting in the projector's
Settings menu, you can start the playlist by pressing the [User]
button. When there is a timetable assigned, the playlist will play back
according to the schedule in the timetable.
• You can also hold down the [Num] and numeric buttons to project
your favorite playlist. You can set a remote control shortcut key
using the software you used to create the playlists.
gg Related Links
• "Creating Playlists Using Epson Web Control" p.89
• "Supported Content Playback Mode File Types" p.90
• "Content Playback Mode Restrictions" p.91
Creating Playlists Using Epson Web Control
In Content Playback mode, you can create playlists using a Web browser and
save them to a USB flash drive connected to a projector on a network.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
