EasyManua.ls Logo

Epson EB-PU2220B - Projector Specifications

Epson EB-PU2220B
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Projector Specifications
184
Item Specifications
Product name EBPU2220B/EBPU2120W
Dimensions 586 (W) × 185 (H) × 492 (D) mm (not including raised
section)
Projection system RGB liquid crystal shutter
LCD panel size (diagonal) 1.0"
Display method Poly-silicon TFT active matrix
Resolution 2,304,000 pixels
WUXGA (1920 (W) × 1200 (H) dots) × 3
Focus adjustment Powered
Zoom adjustment 1.0 to 1.6 (Optical Zoom)
Projection lens Optional lens supported.
Standard lens: ELPLM15
Lens Shift Powered
Maximum vertical direction: Approx. ±60%
Maximum horizontal direction: Approx. ±18%
Light source Laser diode
Laser class Class 4
Light source output power
Up to 48.4 W × 10 (484 W)
Wavelength 449 to 461 nm
Light source operation
time *1
Light Source Mode: Normal, Quiet: Up to about 20,000
hours
Light Source Mode: Extended: Up to about 30,000 hours
Brightness*2
Light Source Mode: Normal: 20,000 lm
Light Source Mode: Quiet, Extended: 14,000 lm
Contrast ratio 2,500,000:1 exceeded (Dynamic Contrast Normal/High
Speed)
Color reproducibility Up to 1,070 million colors (Depends on the interface)
Item Specifications
Scanning frequency Analog:
Horizontal: 31 to 92 kHz
Vertical: 50 to 85 Hz
HDMI/HDBaseT:
Horizontal: 15 to 135 kHz
Vertical: 23.98/24/25/29.97/30/50/59.94/60 Hz
DVI-D:
Horizontal: 15 to 75 kHz
Vertical: 23.98/24/29.97/30/50/59.94/60 Hz
SDI (EBPU2220B):
Horizontal: 15 to 67.5 kHz
Vertical: 23.98/24/25/29.97/30/50/59.94/60 Hz
Power supply
100 - 120VAC 50/60 Hz 8.2 A
200 - 240VAC 50/60 Hz 6.6 A
Operating power
consumption (100 to 120
V area)
Light Source Mode: Normal, Custom: 810 W
Operating power
consumption (220 to 240
V area)
Light Source Mode: Normal, Custom: 1301 W
Light Source Mode: Quiet, Extended: 899 W
Standby power
consumption
Communication On: 2.0 W
Communication Off: 0.4 W
Thermal output (max.)
100 to 120 V area: 2754 BTU/h
220 to 240 V area: 4423 BTU/h
Air flow (max.) 436 CFM
Operating altitude Altitude 0 to 3,048 m
Operating temperature
(when using a single
projector installation) *3
Altitude of 0 to 2,286 m: 0 to +50°C (Humidity of 20 to
80%, No condensation)
Altitude of 2,287 to 3,048 m: 0 to +45°C (Humidity of
20 to 80%, No condensation)

Table of Contents

Related product manuals