Epson EB-PU2220B - Stacking Using the Epson Projector Professional Tool Software; Stacking Using the Projectors Menu

Multi-Projection Features
131
• Scale Vertically to scale the image vertically only.
• Scale Horizontally to scale the image horizontally only.
• Select the Clip Adjustment setting and use the arrow buttons to
adjust the coordinates and size of each image as you view the screen.
• Select Clip Range to preview the clipped area you selected.
gg Related Links
• "Projector ID" p.101
• "Projector Grouping" p.101
• "Tiling" p.101
• "Edge Blending" p.102
• "Black Level" p.102
• "Screen Matching" p.103
• "Color Matching" p.104
• "Scale" p.81
Stacking Using the Epson Projector Professional Tool Software
You can create one bright image by overlaying images from up to 6 projectors
using the optional external camera and the Epson Projector Professional Tool
software.
See the Epson Projector Professional Tool Operation Guide for details.
a
Start the Epson Projector Professional Tool software.
b
Create a group of projectors on the Layout/Monitoring tab.
c
Specify each projector's position using Tiling and Stacking Settings on
the Edit Group screen.
d
Start the Geometry Correction Assist - Stacking Function wizard.
When the wizard has finished, if there are any gaps in the pixels of the
projected images, adjust the Point Correction setting manually.
a
The required time to automatically configure stacking varies depending
on the layout and number of projectors. It can take up to
approximately 9 minutes.
Stacking Using the Projector's Menu
If the Epson Projector Professional Tool software is not available, you can
create one bright image by overlaying images from up to 2 projectors using
the projector's menu.
a
This function is only available when the optional external camera is
installed.
a
Connect two projectors using a LAN cable.
b
Make sure the DHCP setting is turned on in the projector's Network
menu for two projectors.
a
Wait for 1 minute after assigning an IP address automatically.
c
Select Extended > Multi-Projection > Simple Stacking > Point
Correction, and adjust the image position, shape, and focus on one of