Multi-Projection Features
127
See the Epson Projector Professional Tool Operation Guide for details.
a
Start the Epson Projector Professional Tool software.
b
Create a group of projectors on the Layout/Monitoring tab.
c
Specify each projector's position using Tiling and Stacking Settings on
the Edit Group screen.
d
Start the Geometry Correction Assist - Tiling Function wizard.
When the wizard has finished, perform the following operations as necessary:
• Screen Matching to correct the tint and brightness of each projected image.
• Point Correction to adjust the gaps in the positions of the projected image.
• Scale to crop and/or scale portions of the image.
a
• The required time for configuring tiling automatically varies
depending on the layout and number of projectors. It takes up to
approximately 8 minutes.
• The required time for screen matching varies depending on the
layout and number of projectors. It takes up to approximately 18
minutes.
Tiling Using the Projector's Menu
If you have not installed the optional external camera or the Epson Projector
Professional Tool software is not available, you can project one large image
from up to 15 projectors using the projector's menu.
a
Select the Multi-Projection setting in the projector's Extended menu.
b
Select the Projector ID setting and give each projector a unique ID to
control multiple projectors from a remote control.
c
Set the remote control's ID to match the projector's ID to operate only a
particular projector. Set the remote control [ID] switch to On, press the
[ID] button on the remote control, and then press the numeric button
that matches the projector's ID within 5 seconds. (Enter a one-digit or
two-digit number.)
d
If you are combining images from multiple projectors on a network,
select the Projector Grouping setting on the master projector and
create a group of projectors that you can control simultaneously.
To Next Page
Loading...
