Laser Safety Information
189
This projector is a Class 1 laser product that complies with the IEC/EN60825-
1:2014 international standard for lasers.
Follow these safety instructions when using the projector.
Warning
• Do not open the projector's case. The projector contains a high-powered laser.
• Possibly hazardous optical radiation emitted from this product. Do not look at
operating light source. Eye injury may result.
• Do not expose the light from the projector to optical devices, such as a
magnifying glass or reflectors. Continuing to use the projector in this condition
could cause viewers to feel unwell. It could also cause a fire or accident.
• No direct exposure to the beam shall be permitted, RG3 IEC 62471-5:2015.
• Operators shall control access to the beam within the hazard distance or install
the product at a height that will prevent eye exposure within the hazard distance.
Caution
Do not disassemble the projector when disposing of it. Dispose according to your
local or national laws and regulations.
a
The projector uses a laser as the light source. The laser has the
following characteristics.
• Depending on the surroundings, the brightness of the light source
may decline. The brightness declines a lot when the temperature gets
too high.
• The brightness of the light source declines the longer it is used. You
can change the relationship between usage time and decline in
brightness settings.
gg Related Links
• "Laser Warning Labels" p.189
Laser Warning Labels
Laser warning labels are attached on the projector. The labels may vary
depending on the country or area of purchase.
Inside
To Next Page
Loading...
Need help?
General
Weight and Dimensions
