Epson EB-PU2220B - Attaching and Removing a Lens

Attaching and Removing a Lens
30
Follow the instructions in these sections to attach or remove a compatible
lens.
The following lens are available.
• ELPLX02S
• ELPLX02WS
• ELPLU03S
• ELPLU04
• ELPLW08
• ELPLW06
• ELPLM15
• ELPLM10
• ELPLM11
• ELPLL08
Warning
Make sure you turn off the projector and unplug the power cord before attaching
or removing a lens. Otherwise, you may receive an electric shock.
Attention
• If dust or dirt gets inside the projector, projection quality deteriorates and it
could cause a malfunction. Be sure to observe the following precautions when
handling.
• Make sure the front of the projector is not facing up when you attach or
remove the lens.
• Remove the lens only when necessary.
• Store the projector with the lens installed.
• Avoid touching the lens with your bare hands to prevent fingerprints on or
damage to the lens surface.
gg Related Links
• "Attaching a Lens" p.30
• "Removing a Lens" p.34
Attaching a Lens
You can attach a compatible lens to the projector.
a
For information on installing an ultra short-throw zoom lens, see the
User's Guide supplied with the lens.
a
Turn off the projector and unplug the power cord.
b
Remove the lens replacement cover.