Epson EB-PU2220B - Reset All Config; Reset All (Factory Default)

Reset Menu
121
Reset All Config
s Reset > Reset All Config
You can reset most of the projector settings to their default values.
You cannot reset the following settings:
• Memory
• Startup Screen *
• Panel Alignment
• Color Uniformity
• User's Logo *
• Date & Time
• Color Matching
• Schedule Settings
• Language
• Network menu items other than Wireless Mode
• NFC Settings
* These settings are reset when you set User's Logo Protection to Off.
Reset All (Factory Default)
s Reset > Reset All (Factory Default)
You can reset the setting values to the values you set or to their factory default
values.
Reset All (User Default)
You can apply the values you set in the User Default Setting menu.
Reset All (Factory Default)
You can reset all of the projector settings to their default factory values.
You cannot reset the following settings:
• Light Source Info
• Operation Hours
• Password Protection
• Password
• Schedule Settings *
* This setting is reset when you set Schedule Protection to Off.
User Default Setting
You can define the default value used when performing the Reset All
(User Default) functions.
You can set the values for the following settings:
• Color Mode
• Light Source Mode
• Brightness Level
• Energy Saving Mode
• Constant Brightness
• Messages
• Standby Confirmation
• A/V Mute Timer (EB‑PU2120W)
• Release A/V Mute (EB‑PU2120W)
• Shutter Timer (EB‑PU2220B)
• Shutter Release (EB‑PU2220B)
• Remote Control Type
• Beep
• A/V Settings
• Standby Mode
• Sleep Mode
• Language
• Wireless Mode
• DHCP (in the Wired LAN menu)
• Command Communication