Settings Menu
90
Attention
Do not remove the USB flash drive from the projector or disconnect the projector's
power cord while creating playlists. Data saved on the USB flash drive may be
damaged.
a
Make sure the projector is operating in Content Playback mode.
b
Make sure your computer or device is connected to the same network
as the projector.
c
Make sure a USB flash drive is connected to the projector's USB-A port.
d
Start your Web browser on your computer or device.
e
Go to the Epson Web Control screen by entering the projector's IP
address into the browser's address box. When entering an IPv6 address,
wrap the address with [ and ].
f
Select USB Memory Device.
g
Select Upload New Data.
h
Select the images or movies you want to add to the playlist.
a
You can upload .avi, .jpeg (.jpg), .png, .bmp, or .gif files.
If you want to add .mp4 or .mov files to the playlist, use the
Epson Projector Content Manager software or the Epson
Creative Projection app.
The selected files are copied to the connected USB flash drive.
i
Do one of the following:
• To add them to the existing playlist, select Add to Playlist and select
the playlist you want to add them to.
• To create a new playlist and add them to it, select Create New
Playlist.
j
Edit the playlist.
k
When you have finished editing the playlist, select Finish.
a
• See the section in this guide covering Web Control Options for
details.
• You can play the playlist from the Remote or Playlist screen.
• When you want to specify when the playlist starts and finishes,
schedule the playlist using the Epson Projector Content Manager
software.
gg Related Links
• "Epson Web Control" p.135
Supported Content Playback Mode File Types
You can project these types of files using the projector's Content Playback
feature.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
