Attaching and Removing a Lens
32
e
Hold the lens firmly, then pinch the lock lever and move it to the Lock
position.
Warning
Make sure the lens is secured.
If the lens is not secured, it may fall off and could cause an injury when
moving the projector.
f
If you want to secure the lens more firmly, tighten the screw next to the
lock lever using a hexagonal wrench (2.5mm).
a
If you are using the ELPLX02S/ELPLX02WS, the lens is secured
even without using the screw lock.
To Next Page
Loading...
