Image Menu
73
Contrast
s Image > Contrast
You can adjust the difference between light and dark areas of the image.
Color Saturation
s Image > Color Saturation
You can adjust the intensity of the image colors.
Tint
s Image > Tint
You can adjust the balance of green to magenta tones in the image.
Sharpness
s Image > Sharpness
You can adjust the sharpness or softness of image details.
Standard
You can adjust the image sharpness so that it is sufficiently balanced.
Thin Line Enhancement
Higher values enhance the details such as hair or fabric patterns.
Thick Line Enhancement
Higher values enhance the outline, background, and the other main parts
of the objects in the image to show them clearly.
White Balance
s Image > White Balance
You can adjust the overall tint of the image.
Color Temp.
You can adjust the overall tint of the image within a range from 3200K to
10000K. Higher values tint the image blue and lower values tint the image
red.
When Color Mode is set to Dynamic, the set Color Temp. may differ from
the actual Color Temp. of the light from the projector. Use this menu as a
guide.
G-M Correction
Higher values tint the image green and lower values tint the image red.
Offset R/Offset G/Offset B/Gain R/Gain G/Gain B
You can adjust the individual R (red), G (green), and B (blue) components
of the offset and gain.
4K Enhancement
s Image > Image Enhancement > 4K Enhancement
You can project an image at a doubled resolution by diagonally shifting 1
pixel in increments of 0.5 pixels. A high-resolution image signal is projected
in fine detail.
Off
If a signal that exceeds the panel resolution of this projector is input, the
image is displayed according to the panel resolution of this projector.
Full HD
For a signal with a resolution of 1080i/1080p/WUXGA or higher.
WUXGA+
For a signal with a resolution that exceeds WUXGA. When projecting a
high-resolution movie, you can project a high-definition image by using
this setting with Image Preset Mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
