Epson EB-PU2220B User Manual

Signal Menu
79
Native
Displays images as is (aspect ratio and resolution are maintained). Areas
that exceed the edges of the projected screen are not projected.
a
• Available only when the current source is set to one of the following:
• Computer
• HDMI
• DVI-D
• HDBaseT
• SDI (EB‑PU2220B)
• Available only when the Scale setting is set to Off or the Scale Mode
setting is set to Full Display.
s Signal > Scale > Scale Mode
• Set the Screen Type setting in the projector's Extended menu before
changing the aspect ratio.
s Extended > Display > Screen > Screen Type
• To display images without black bars, set Resolution to Wide or
Normal in the projector’s Signal menu according to the computer’s
resolution.
• The available aspect ratio setting varies depending on the selected
Screen Type setting and the input signal from your image source.
• Note that using the aspect ratio function of the projector to reduce,
enlarge, or split the projected image for commercial purposes or for
public viewing may infringe upon the rights of the copyright holder
of that image based on copyright law.
• If there are margins between the edge of the image and the projected
screen frame, you can adjust the position of the image using the
Screen Position setting in the projector's Extended menu.
s Extended > Display > Screen > Screen Position
• You can change the projector's Aspect using the [Aspect] button on
the remote control.
Tracking
s Signal > Tracking
You can adjust the signal to eliminate vertical stripes in computer images.
a
Setting is only displayed when the current source is Computer.
Sync.
s Signal > Sync.
You can adjust the signal to eliminate fuzziness or flickering in computer
images.
a
Setting is only displayed when the current source is Computer.
Position
s Signal > Position
You can adjust the image location on the screen.
a
Setting is only displayed when the current source is Computer.
Auto Setup
s Signal > Auto Setup
Set to On to automatically optimize computer image quality.
a
Setting is only displayed when the current source is Computer.

Epson EB-PU2220B Specifications

General

Matrix type	3-panel (p-Si TFT active)
Number of colors	1.07 billion colors
Native aspect ratio	-
Projection technology	3LCD
Supported aspect ratios	4:3, 16:10, 16:9
Contrast ratio (typical)	2500000:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Keystone correction, vertical	±45 °
Keystone correction, horizontal	±30 °
Light source type	Laser
Service life of light source	20000 h
Focus	Auto
Throw ratio	1.57 – 2.56
Optical zoom	1.6 x
Focal length range	14.8 – 17.7 mm
Aperture range (F-F)	2 - 2.1
Interchangeable lens	Yes
Vertical lens shift range	-60 - 60 %
Horizontal lens shift range	-18 - 18 %
Number of optional lenses supported	9
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160i, 2160p
Supported graphics resolutions	640 x 480 (VGA), 720 x 576, 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 3840 x 2160, 4096 x 2160
HDMI connector type	Full-size
Serial interface type	RS-232C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 2.0 Type-A ports quantity	2
Noise level	45 dB
HDCP version	2.3
Projection modes	Ceiling, Front, Rear
Noise level (economic mode)	37 dB
Product type	Large venue projector
Product color	Black
Market positioning	Presentation
Cable lock slot type	Kensington
Power source	AC
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	2 W
Power consumption (typical)	1301 W
Power consumption (economy mode)	899 W
Operating temperature (T-T)	0 - 50 °C
Sustainability certificates	RoHS

Weight and Dimensions

Depth	493 mm
Width	587 mm
Height	218 mm
Weight	24400 g