Projector Specifications
185
Item Specifications
Operating temperature
(when using a multiple
projector installation) *3
Altitude of 0 to 2,286 m: 0 to +45°C (Humidity of 20 to
80%, No condensation)
Altitude of 2,287 to 3,048 m: 0 to +40°C (Humidity of
20 to 80%, No condensation)
Storage temperature -10 to +60°C (Humidity of 10 to 90%, No condensation)
Mass (not including lens) EB‑‑PU2220B:
Approx. 24.9 kg
EB‑‑PU2120W:
Approx. 24.8 kg
Network RJ45 (100BASE-TX/10BASE-T) x 1, USB connector (A
type) x 1 (wireless LAN unit ELPAP11 Corresponding
to IEEE802.11a(5GHz)/b(2.4GHz)/g(2.4GHz)/n
(2.4GHz、5GHz))
*1 Approximate time until the light source brightness decreases to half of its
original value. (Assuming the projector is being used in an environment
containing airborne particles of 0.04 mg/m3 or less. This is an approximate
guide only and may change depending on the projector’s usage and
surroundings.)
*2 The specifications are when the standard lens is attached.
*3 Light source brightness automatically dims if the surrounding temperature
gets too high. (Approximately 40°C at an altitude of 0 to 2,286 m, and
approximately 35°C at an altitude of 2,287 to 3,048 m; however, this may vary
depending on the surrounding environment.)
This product is also designed for IT power distribution system with phase-to-
phase voltage 230V.
To Next Page
Loading...
