EasyManuals Logo

Epson EB-PU2220B User Manual

Epson EB-PU2220B
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #160 background imageLoading...
Page #160 background image
Projector Status Display Messages
160
Signal Information category
Information Description
5V Detect Displays the detection results of 5V signals.
TMDS Clock Displays the TMDS frequency of the current input signal.
H-Frequency Displays the horizontal frequency of the current input
signal.
V-Frequency Displays the vertical frequency of the current input signal.
Stable Time Displays the amount of operating time since the input
source was determined.
HDCP Status Displays the HDCP status.
HDCP Ver Displays the HDCP version.
AVI VIC Displays the VIC information (AVI) of the current input
signal.
AVI Checksum Displays the checksum result for AVI.
AVI Sampling Str Displays color sampling for AVI.
Signal Mode Displays the signal mode.
HDR Mode Displays the HDR mode.
EDID Mode Displays the EDID mode.
HDBaseT Level Displays the image signal information from the HDBaseT
port.
SDI Link Mode * Displays the linking type for SDI.
Sync Detect * Displays the results of signal detection for each 3G/HD/SD
SDI port.
PayloadID Detect * Displays the results of SDI payload ID detection.
Resolution * Displays the resolution.
Refresh Rate * Displays the refresh rate for SDI.
Color Sampling * Displays the color sampling.
Pixel Depth * Displays the color depth for SDI.
SDI Type * Displays the type of SDI.
3G Mapping Level * Displays the mapping level for 3G-SDI.
Information Description
Color Space * Displays the color space conversion method.
* Available only for EBPU2220B.
Network Wired category
Information Description
Projector Name Displays the name used to identify the projector when
connected to a network.
Connection Mode Displays the connection path for the LAN.
DHCP Displays the DHCP settings.
IP Display Displays the IP address display settings.
IP Address Displays the IP address.
MAC Address Displays the MAC address.
Network Wireless category
Information Description
Projector Name Displays the name used to identify the projector when
connected to a network.
Connection Mode Displays the connection mode to use when connecting the
projector and a computer over a wireless LAN.
SSID Display Displays the SSID display settings.
SSID Displays the SSID.
DHCP Displays the DHCP settings.
IP Display Displays the IP address display settings.
IP Address Displays the IP address.
MAC Address Displays the MAC address.
Security Displays the security settings.
Antenna Level Displays the reception status for Wi-Fi.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-PU2220B and is the answer not in the manual?

Epson EB-PU2220B Specifications

General IconGeneral
Matrix type3-panel (p-Si TFT active)
Number of colors1.07 billion colors
Native aspect ratio-
Projection technology3LCD
Supported aspect ratios4:3, 16:10, 16:9
Contrast ratio (typical)2500000:1
Screen size compatibility- \
Projector native resolutionWUXGA (1920x1200)
Keystone correction, vertical±45 °
Keystone correction, horizontal±30 °
Light source typeLaser
Service life of light source20000 h
FocusAuto
Throw ratio1.57 – 2.56
Optical zoom1.6 x
Focal length range14.8 – 17.7 mm
Aperture range (F-F)2 - 2.1
Interchangeable lensYes
Vertical lens shift range-60 - 60 %
Horizontal lens shift range-18 - 18 %
Number of optional lenses supported9
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160i, 2160p
Supported graphics resolutions640 x 480 (VGA), 720 x 576, 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 3840 x 2160, 4096 x 2160
HDMI connector typeFull-size
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 2.0 Type-A ports quantity2
Noise level45 dB
HDCP version2.3
Projection modesCeiling, Front, Rear
Noise level (economic mode)37 dB
Product typeLarge venue projector
Product colorBlack
Market positioningPresentation
Cable lock slot typeKensington
Power sourceAC
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)2 W
Power consumption (typical)1301 W
Power consumption (economy mode)899 W
Operating temperature (T-T)0 - 50 °C
Sustainability certificatesRoHS
Weight and Dimensions IconWeight and Dimensions
Depth493 mm
Width587 mm
Height218 mm
Weight24400 g

Related product manuals