1-6
EMP-TW1000
SEIKO EPSON Revision:A
1.2.3 Remote Control
Figure 1-6. Remote Control
Remote control light-emitting area
Outputs remote control signals.
On/Off buttons
Turns the projector power on/off.
Indicator
Illuminates when remote control signals
are being output.
Memory button
Retrieves stored memories.
Menu button
Displays the full-screen configuration
menus.
Select/Line menu button
Displays the line menu.
When viewing a menu, press this button
to select the menu item and proceed to
the next display.
button
Press to select menu items and adjust-
ment values and to adjust the zoom and
focus.
Gamma button
Adjusts the gamma values.
Color Temp. button
Adjusts the absolute color temperature.
Pattern button
Selects a test pattern.
Contrast button
Adjusts contrast.
S.Tone (Skin Tone) button
Adjusts the skin tones of people who
appear in the images.
Blank button
The projected images switch off and on
each time this button is pressed.
(Illumination) button
All buttons on the remote control illuminate when
this button is pressed. The button illumination
switches off automatically after about 10 seconds
have passed.
Color Mode button
Selects the color mode.
Aspect button
Selects the aspect.
Esc button
Pressing [Esc] while viewing a menu
displays the previous menu.
Changes to the image from the projector's
selected port.
HDMI button
PC button
S-Video button
Video button
D/scart button
Compo. button
Source buttons