Epson EMP-TW1000 User Manual

3-8
EMP-TW1000
SEIKO EPSON Revision:A
3.2.4 Image Display and Quality
C A U T I O N
 The image quality can also be affected by condensation or by a dirty lens.
If condensation forms, the problem will correct itself naturally if the projector
is left to stand for a while.
START
Turn on the main
Power switch.
Press the [Power] button
to turn the power on.
Does "NO SIGNAL"
appear in the bottom-left
of the screen?
Yes
Does the image appear
clearer?
Yes
No
No
Yes
Clean the Projection Lens.
Does an image appear on
the screen?
No
Yes
Does the image appear
clearer?
Yes
Is the lamp turned on?
Replace the Optical
Engine
No No
Replace the Lamp Assy.
Clean the areas around
the Light Valves.
Yes
Is the lamp turned on?
1. Adjust the height using
the front adjustble foot.
2. Adjust the projection
size with the Zoom
Ring.
3. Turn the Lens Shift Dial
to adjust the image
position.
4. Adjust the focus with
the Focus Ring.
No
Does the image appear
clearer?
Yes
Replace the Optical
Engine
No
Replace the Optical
Engine
C
(To next page)

Epson EMP-TW1000 Specifications

General

Brand	Epson
Model	EMP-TW1000
Category	Projector
Language	English