If the desired size is not available in the
pull-down menu of the Change Paper Size
dialog box, click Custom Paper Size... and then
set and save a custom size.
U “Printing at Non-Standard Sizes” on
page 64
E
Set Output Size.
To enlarge or reduce the size, select from the
pull-down menu below the Document Size.
See the following for more details on
enlargement settings.
U “Enlargements and Horizontal and Vertical
Banners” on page 59
F
Select Source and check the roll paper width
(paper size when cut sheet) and paper type.
Select from Roll Paper, Auto Sheet Feeder, and
Sheet. If you select a paper source for which
paper is not loaded in the printer,
appears.
For Roll Paper Width (Paper Size when cut
sheet) and Media Type, the settings
congured
in the control panel of the printer are applied
automatically.
Note:
If the paper is loaded or changed aer opening the
printer driver's dialog box, the paper size and
paper type settings
congured
on the printer will
not be applied. In this case, click the Acquire Info
button to apply the settings.
G
Select Select Target in Print Quality.
Choose an option according to the type of
document and how it will be used.
To set the color correction method or color
balance in detail to match your preferences,
clear the Simple Settings check box. See the
following for more details.
U “Correct color and print” on page 68
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Printing with the Printer Driver from Your Computer
47
To Next Page
Loading...
Need help?
General
