Epson SC-T5100 User Manual

Setting color management with
the printer driver
Color Management Printing by Host
ICM (Windows)
Use image data in which an input prole has been
embedded. Also, the application must support ICM.
A
Make the settings for color adjustment using
the application.
Depending on the type of the application, make
the settings following the table below.
Adobe Photoshop CS3 or later
Adobe Photoshop Elements 6.0 or later
Adobe Photoshop Lightroom 1 or later
OS Color Management
Settings
Windows 8.1,
Windows 8,
Windows 7,
Windows Vista
Printer Manages Colors
Windows XP
(Service Pack 2 or
later and .NET 3.0
or later)
Windows XP
(other than the
above)
No Color Management
In other applications, set No Color
Management.
Note:
For information on supported platforms, see the
website for the application in question.
Setting example of Adobe Photoshop CC
Open the Print dialog box.
Select Color Management, select Printer
Manages Colors in Color Handling, and click
Print.
When using an application without a color
management function, start from step 2.
B
Clear the Simple Settings check box in the
Print Quality area on the Printer Settings tab of
the printer driver and then select ICM from the
Select Target list.
U “Basic Operating Procedures (Windows)”
on page 46
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Printing with the Printer Driver from Your Computer
75

Epson SC-T5100 Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Memory	1 GB
Operating Systems	Windows, macOS
Print Technology	PrecisionCore MicroTFP
Ink Type	UltraChrome XD2
Connectivity	Ethernet
Paper Sizes	A4, A3, A2, A1, B4, B3, B2, B1
Print Margin Roll	3 mm (top), 3 mm (right), 3 mm (bottom), 3 mm (left)
Emulations	ESC/P Raster
Display	4.3-inch color LCD touchscreen
Print Speed Draft Mode	22 sec/A1 on plain paper
Media Types	Plain Paper, Matte Paper, Tracing Paper, Fine Art Paper, Photo Paper, Coated Paper
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)